HDMI 2.1 over IP Multicast System
CT6021
SynXStream
-
Supports HDMI 2.1 & HDCP 2.3
-
Supports resolution up to 4K@120Hz 4:4:4
-
Supports VRR (Variable Refresh Rate) & ALLM (Auto Low Latency Mode)
-
Extends transmission over Cat.5e cable up to 100m (330ft) from the HDMI source at Ultra-HD 4K@120Hz 4:4:
-
Supports PiP (Picture-in-Picture), PbP (Picture-by-Picture), and PoP (Chroma Key)
-
Transceiver dual-role architecture: configurable via firmware as Tx (Transmitter) or Rx (Receiver), simplifying deployment and reducing inventory cost
HDMI 2.1 over IP Multicast System
CT6020
SynXStream
-
Supports up to 4K@120Hz 4:4:4 resolution with crystal-clear, uncompressed video quality
-
VRR (Variable Refresh Rate) and ALLM (Auto Low Latency Mode) support
-
Extends transmission up to 100m (330ft) over Cat5e/Cat6/6a cable at 4K@120Hz 4:4:4
-
Latency < 1 frame, providing real-time video response
-
Built-in 10/100 Mbps Ethernet port with transparent pass-through mode
-
Supports Point-to-Point, Point-to-Many, and Multicasting transmission modes
-
Ultra-low latency, high-performance HDMI 2.1 over IP design ideal for professional AV applications
Zero Latency 8K/4K HDMI 2.1 & Fiber-Based AV
CT6000
SynXStream
-
Supports HDMI 2.1 Variable Refresh Rate (VRR) for smoother, tear-free video output
-
Zero-latency fiber transmission architecture
-
With 3T1R fiber module:
-
Supports uncompressed 4K60 transmission
-
Supports lossless 4K120 / 4K144 transmission
-
With 5T1R fiber module:
-
Supports uncompressed 8K30 transmission
-
Supports lossless 8K60 transmission
1080p60 HDMI over IP with Video Matrix
CT1270
SynXStream
-
A simplified and unified transmitter and receiver design
-
A total solution for display extender, splitter, switcher and matrix
-
Fully work with your existing LAN infrastructure without installation
-
Extend HDMI signal up to 180m (600ft) by single Cat.5 cable.
-
Supports Video/Audio/USB/IR/UART over IP
-
Use conventional Ethernet L2 Switch for extension and distribution, and can be cascaded by the L2 Ethernet switches for longer distance
-
Supports Graphic/ Video mode selection for different applications and the latency is about 80 ~100 ms
-
A total Integrate LAN switch inside to support daisy chain
-
Supports lossless latency (under 1 ms)
-
Extend HDMI signal up to 180m (600ft) by single Cat.5 cable
-
Support video resolution up to 1080p@60Hz
-
Supports Stereo Audio over IP, independent to HDMI extension
-
Supports IR (20KHz~60KHz) extension over IP
-
Compliance with HDMI 1.4 and HDCP 1.4
1080p60 HDMI over IP with Zero Latency
CT1273
SynXStream
-
Network KVM
-
Supports 1080p H.264 Encoder
-
Supports HDMI Input and Passthrough
-
-
Cloud KVM
-
In the era of digital innovation, the ability to control systems remotely without compromising security is paramount. This is where our unique solution, KVM Cloud, shines.
-
Our Cloud-Based Solution is Ideal for those who seek flexibility and seamless access from anywhere. Our cloud product ensures your data is secure while providing you with the freedom of remote management.
-
KVM Cloud is a versatile, secure, and efficient solution for remote control of KVM devices.
-
KVM Cloud caters to your specific needs, ensuring optimal performance and security. Experience the future of remote control with KVM Cloud today.
-
SynAVIO Network KVM / Cloud KVM
CT1278
SynXStream
-
Supports resolution up to 4K2K@60 4:4:4 8bits
-
Flexible and scalable UHD Video Broadcasting by Gigabit Ethernet LAN/Switch
-
One to one, one to many & multi-casting broadcasting architecture
-
Supports full frequency IR signal from 20KHz to 60KHz
-
Full Duplex RS-232 control up to 115,200 bps through connector
-
Easy Dip Switch matching for multi-casting group configuration
-
Supports Video Wall function
-
Wall mounting housing design for easy and robust installation
SynAVIO NetAV 4K HDMI 2.0 over IP Multicast
CT1500
SynXStream
-
Supports resolution up to 4K2K@60 4:4:4
-
Flexible and scalable UHD Video Broadcasting by 10 Gigabit Ethernet LAN/Switch
-
Extends the transmission over multi-mode optic cable up to 300m (990ft) (OM3)/400m (1320ft) (OM4)
-
Light compress with less than 100us latency for 4K2K@60 4:4:4
-
Supports full frequency IR signal from 20KHz to 60KHz
-
Full Duplex RS-232 control up to 115,200 bps through connector
-
Supports software to configure & upgrade device and to control the switching operation of the various signal types
-
Supports Video Wall & Multi-view function
-
Wall mounting housing design for easy and robust installation
SynAVIO NetAV 4K HDMI 2.0 over IP Multicast
CT2000
SynXStream
-
Supports resolution up to 4K2K@60 4:4:4
-
Flexible and scalable UHD Video Broadcasting by 10 Gigabit Ethernet LAN/Switch
-
Extends the transmission over multi-mode optic cable up to 300m (990ft) (OM3)/400m (1320ft) (OM4)
-
Light compress with less than 100us latency for 4K2K@60 4:4:4
-
Supports full frequency IR signal from 20KHz to 60KHz
-
Full Duplex RS-232 control up to 115,200 bps through connector
-
Supports software to configure & upgrade device and to control the switching operation of the various signal types
-
Supports Video Wall & Multi-view function
-
Wall mounting housing design for easy and robust installation